Digital Ignition ZDG3.23 - Moto Guzzi (Distributor Motoplat)
Especially designed for the California III. The distance between the alternator cover and fender is extremely low through the wide dark front fender. A cultivating the lid by approx. 10 mm distance must be placed on the alternator, but alone this place no longer exists. For the Cali. III there is therefore the distribution solution: the pickup circuit board with Hall sensors replaced now the Motoplat pick-up. The pulse generator is replaced with the driver. The adjustment is made by turning the lens. The correct position is indicated by a led on the circuit board. The correct position is indicated by a led on the circuit board. To protect the coils after engine stop, the ignition current is switched off after approx. 5 seconds.
- 9 ignition curves, two of them for dual ignition
- minimum charge time of ignition coils (dynam. close angles)
- easy electrical connection through a large multi plug
- Tachometer output for electronic revolution counter (selectable output frequency)
- adjustable speed limitation, standard 2 levels: 7,900 and 9,700 rpm
- optionally up to 16 programmable levels
- easy to assemble
- easy adjustment
- no special ignition coils
- high operational reliability up to 20,000 rpm