Motorcycle Tools

Reinforced chain tool for cutting and riveting motorcycle chains with hollow rivet links – no swingarm removal needed.

Add-on set for the Kellermann chain tool: enables it to handle solid rivet chain links.

Tool for holding the camshaft on the Breva, Griso, Norge, California 1100, 1100 Sport and V11.

Ring nut wrench with T-handle for the fork sleeve on the V7 700, V7 Special, V7 Sport and 850 GT incl. California and Eldorado.

Single 0.15 mm feeler gauge, 65 mm long, with handle – for example for setting valve clearance.

Single 0.10 mm feeler gauge, 65 mm long, with handle – for example for setting valve clearance.

Zinc-plated hex bolt M12 x 1.5 x 70 mm, property class 8.8, available separately for the Moto Guzzi clutch centring tools.

Genuine flywheel puller from the Piaggio tool range for Moto Guzzi and Aprilia, listed by the supplier for the V7 III among others.

Feeler gauge with 8 blades from 0.03 to 0.10 mm in hundredth steps, designed specifically for Ducati according to the supplier, made in Germany.

Spring steel band with tensioning key, infinitely adjustable from 45 to 90 mm, for fitting the piston with its rings into the cylinder.

BGS circlip pliers, 160 mm long, with four interchangeable heads – straight and angled – for internal and external rings.

Pliers for removing and fitting piston rings in the 50 to 100 mm range, so the rings don't break during replacement.

Genuine special tool for holding the camshaft gear, listed for the Moto Guzzi V7 III.

Feeler gauge set with 21 blades from 0.10 to 0.50 mm in 0.02 mm steps, including the 0.22 mm size needed for Moto Guzzi.

Two-step oil filter wrench with 15 flutes for filters of 74 to 76 mm diameter, driven by a 3/8-inch ratchet, e.g. for UFI 2328700 and Champion C305.

Genuine special tool from the Moto Guzzi and Aprilia range: an adjusting screw for the crankshaft.

Complete degree wheel kit with holder, pointer and screws, 242 mm in diameter, e.g. for the Breva, Griso, Norge, Stelvio, V11, California 1100 and 750 Nevada.